The subject of this study was to research whether or not different forms of employment contracts had any effect on self reported health. Whether or not any difference between these forms could be explained through the use of employee health care was also a given point of interest. To achieve this, data from the national Swedish institute of health (FHI) was used, with 6465 of the 12 166 that participated in the study. Logistic regression was the primary statistical method.Initial Chi2-analyzation found no significant difference between the two main employment forms present in Sweden. However, when the variables age, sex and level of education were held constant through logistic regression, a difference of odds at 22% between the two employment forms could be identified.

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..

Den här studien undersöker för- och nackdelar med att migrera existerande mobilaapplikationer till Xamarins crossplatform ramverk Xamarin Forms. Metoden somanvänts för att samla in data är inom ramen för forskningsparadigmet Design Science.En prototyp har utvecklats med syftet att undersöka vad som är möjligt att migrera tillXamarin Forms. Prototyputvecklingen har dokumenterats i loggböcker som sedananalyserats som kvalitativ data. Två intervjuer har även genomförts med andraxamarinutvecklare med syftet att nå en djupare förståelse för ämnet. Studien harproducerat ett flödesschema för när ett beslut om att migrera en existerande applikationtill Xamarin Forms bör tas.

Tången 2 is a building situated in Stockholm, Sweden. It´s built in the 1930s and contains both residences and businesses. The property owner, Diligentia AB, wants to lower the energy use in Tången 2. This report consists of an energy audit which clarifies the specific circumstances linked to Tången 2. Collected knowledge is then used, together with the results from the literature study, to decide energy measures to proceed with.

The number of people in the world and the urbanization increases. This leads to a bigger need of space for the built environment, space that soon doesn?t exist. A large portion of humanity?s energy disposal is used for heating of buildings.

In Sweden, a big part of the energy use is used in the housing sector. Political goals and targets are set up which the housing sector needs to work towards. Apartment buildings are a major part of the housing sector in Sweden and therefore reduction of energy use in these kinds of buildings are key to lower the energy use in Sweden. But there are not only political incentives to reduce the energy use. Some energy?saving measures are directly profitable and should thus be performed.

Background The stocksaving has during the last century increased and become more popular in Sweden and during the last 20 years the number of Swedes who save in stocks has more than doubled. While the interest in stocksaving has increased so has the interest in private saving. Today there is a group of people who live of the income which is generated from the stockmarket, they are called ?Daytraders? and they do ?Daytrading?.  They constantly observe the stockmarket and act as soon as new information that can affect the stockrate is revealed.

In this paper I have conducted an analysis to critically examine survey questionnaire forms used in political research to measure trust and distrust. During the first step of the analysis I aimed to identify how the concepts where used in the forms. The second step involved examining if it was possible to relate the questions and items to five theoretical assumptions based on theories of trust (and distrust). The third step was to examine the quality of the forms, in relation to survey and questionnaire designs.The results of the analysis showed that the institutes that conduct the studies tended to use similar questions to measure trust. Some of the forms that where analyzed had very many questions, which could lead to exhaustion for those participating in studies.

In this paper corruption in Bosnia and Herzegovina has been studied to investigate to what extent corruption inhibits Bosnia and Herzegovina?s possibilities of integrating with EU.The overarching research question is how occurrence of various types and forms of corruption affect the possibilities of Bosnia and Herzegovina to fulfill the criteria negotiated by the EU. In order to undertake this exploration the study uses typologies to identify and categorize the various forms of corruption that exist in Bosnia and Herzegovina and theories about the impact of these forms of corruption. After that these forms of corruption are analyzed in relation to their impact on the various political and economic criteria that are set for integration and membership in EU, such as independent justice system and the acceleration of the privatization process.The results show that corruption in Bosnia and Herzegovina represents a major obstacle to several of the criteria set by the EU and thereby integration with EU. Even though that these priorities are told to be set with realistic goals these priorities will be difficult to fulfill with such widespread corruption as in Bosnia and Herzegovina today..

The present study has two purposes. One aim is to investigate to what extent 20 pupils in grade 3 use two different forms of presentation in their narrative texts and how these choices of forms of presentation create certain patterns in the pupils? texts. Another aim is to study to what extent the pupils use various features of spoken language in their narrative texts and whether these features correlate with the forms of presentation. The material in the study consists of 20 narrative texts from the national test in Swedish in 2011.

The purpose of this thesis is to examine how reading different media forms can lead to different experiences for the reader and how they choose which media form to read. Two questions are posed in the study. Question number one is: How does the media form influence the reading experience of the book and question number two is: What reasons can be seen behind the different choices of media forms?The study is based upon qualitative interviews with six readers using different media forms. Two different theories are used for analyzing the result.

This master?s thesis discusses the term physical theatre from a discourse point of view. It also focuses on aspects of power from a field theory perspective. The main theory used is Pierre Bourdieu?s field theory, and I try to apply this onto critical discourse analysis, mainly taken from Michel Foucault.

The purpose of the study was to investigate the use and losses of energy in an existing older building. Another purpose was also to look through various options for heating systems with renewable energy in the building. The aim was to reduce the use and losses of energy. The first step was to study the related electricity bills of the building and also perform measurements and calculations of the building envelope and ventilation. The next step was to find out the possible actions for energy saving by performing measurements and calculations.